Context-free grammars to detect straight segments and a novel polygonal approximation method

A new method for the polygonal approximation is presented. The method is based on the search for break points through a context-free grammar, that accepts digital straight segments with loss of information, as well as the decrease in the error committed employing the comparison of a tolerable error. We present an application of our method to different sets of objects widely used, as well as a comparison of our results with the best results reported in the literature, proving that our method achieves better values of error criteria. Besides, a new way to find polygonal approximations, with context-free grammars to recognize digital straight segments without loss of pixels, it is also addressed.     

基于PolyWorks虚拟装配间隙面差计算分析研究

随着当今社会汽车制造业的迅猛发展,高标准和高需求已经是消费者对汽车制造凯歌的主旋律。而这其中,汽车钣金件的间隙面差就是其中一个重要因素。快速检测间隙面差是否满足设计要求直接关系到汽车白车身的生产精度和企业的工作效率。传统计算间隙面差大多利用量具,易划伤被测物且在零件实际装配后才可测量,降低生产效率,而非接触测量造价昂贵。本课题基于实物的汽车钣金件虚拟装配,对间隙面差的计算方法进行分类与参数调整,提出一种高效率、高标准的间隙面差计算流程。     

Copy Move Forgery Detection based on double matching

Copy Move is a technique widespreadly used in digital image tampering, meaning Copy Move Forgery Detection (CMFD) is still a significant research. In this paper, a novel CMFD method is proposed, including double matching process and region localizing process. In double matching process, the first matching is conducted on Delaunay triangles consisting of Local Intensity Order Pattern (LIOP) keypoints, to find the approximate location of suspicious regions. In order to find sufficient keypoint pairs, the existing set of matching triangles is expanded by adding their neighbors iteratively, covering the whole tampered regions, and the second matching with a looser threshold is conducted on the vertices. In the region localizing process, considering the case of multiple copies, Density-Based Spatial Clustering of Applications with Noise (DBSCAN) is used to classify the keypoint pairs described in a new model. Experimental results indicate that the proposed method, with good robustness, outperforms some state-of-the-art methods.     

岳纸PM8 Optisizer生产实践

Optisizer在生产实践过程中的维护和操作控制关系到其是否正常稳定运行,本文主要介绍了施胶辊更换后的调试和断纸后的操作注意事项,以及运行过程中存在的亮线问题的一些探讨。     

基于“炉机对应”原则的连浇优化方案

国内某炼钢厂为保证浇注周期较短的2号连铸机连浇，多座转炉需同时向该连铸机供应钢水，导致炉 机对应关系不明确，生产组织难度较大。通过对该厂炼钢 连铸过程的工序作业周期与生产运行模式进行解析，在保证连铸机连浇的基础上，探究合理的炉 机对应关系，改善该厂的生产顺行。结果表明，在“一一对应”运行模式下，2号连铸机最大连浇炉数仅为6炉；而在“定炉对定机”运行模式下，若适时接受3号转炉冶炼的钢水，2号连铸机最大连浇炉数可延长至19炉。在此基础上，通过对连铸机“柔性”的优化和钢水供应的合理调配，2号连铸机可满足实际生产的连浇要求。此外，运用“炉→机”匹配度进行评价，计算结果表明优化后的炉 机对应关系得到显著改善。     

物联网中基于Multi-Agent的物间动态关系发现

物联网中存在大量异构关系的实体，其信息间的交互造成了物联网的内在矛盾。针对这一问题，提出将物联网中实体抽象化为对应的Agent，并以个体人为中心，利用本体的语义匹配及改进的物间动态关系计算方法，计算出针对个体人的物间动态关系；将原本异构的实体关系转化为Agent间基于动态关系紧密度排序的网络关系。经实验验证，该方法构建的关系网络可明显改善异构实体间交互的矛盾，而且相比原有类似方法，该方法解决问题的准确率和误差率均有改善，说明了该方法的准确性和可行性。     

Topology optimization for crashworthiness of thin-walled structures under axial crash considering nonlinear plastic buckling and locations of plastic hinges

Although topology optimization is established for linear static problems, more effort is required for solving nonlinear plastic problems. A new topology optimization approach with equivalent static loads (ESLs) is suggested to find the optimum topologies and locations of plastic hinges of thin-walled crash boxes by considering crash-induced deformation, the main crash energy-absorbing mechanism. Together with finite element method crashworthiness analyses, considering all nonlinearities with rate-dependent plasticity, the method was developed using an appropriate time-incremental scheme of ESLs without removing any high values of loads. Analyses show that the crash boxes with optimum topologies have energy-absorbing capabilities equivalent to the original structure. The proposed method is evaluated for two crashes: a crash box at low speed and a double cell subjected to high-speed collision. The results indicate that this method captures nonlinear crushing behaviours and accurate locations of plastic hinges where, if proper reinforcements are made, energy absorption can be enhanced.     

硅酸盐型胶磷矿单一反浮选工艺研究及工业化应用

云南某矿区产的硅酸盐型胶磷矿的SiO_2含量一般在30%以上,堆存数量巨大,使用常规的单一反浮选工艺难以达到要求的精矿指标,但是使用正反浮选工艺或者双反浮选工艺的生产成本又较高,经济效益不理想。从矿石的多元素分析发现,与CaO∶P_2O_5大于1.79的碳酸型磷块岩配矿后使用单反浮选工艺可以获得合格的精矿指标。在此思路上,对两种矿石进行配合比、解离度、磨矿细度和药剂制度的探索研究。当配合比为1∶3,磨矿细度为92%,药剂制度为抑制剂1.5kg/t、调整剂18kg/t、捕收剂3.0kg/t的情况下,最终可以获得P_2O_5品位为28.89%,MgO品位为0.91%,产率62.73%,回收率85.24%的精矿指标。     

Chaos-Based transmitted-reference ultra-wideband communications

Transmitted-reference (TR) ultra-wideband (UWB) communication systems have gained increasing popularity for the usage in the low data rate application, due to its non-coherent receiver structure. In conventional TR system, non-coherency at the receiver is achieved by sending reference pulses prior to the data-bearing pulses. Then, at the receiver side, reference pulses are used as template signals for correlation with data-bearing pulses. Therefore, the orthogonality between reference and data pulses is obtained in time division multiple access (TDMA) fashion. However, the implementation of a wideband delay line is very difficult in the current low power integrated circuits. In this paper, a TR method called Chaos-Based TR (CB-TR) is proposed. In the proposed method, chaotic sequences are used to separate the reference and data pulses. Such approach exploits the benefits of chaotic signals, such as non-periodicity, easy-to-generate, impulse-like autocorrelation value and low cross-correlation value. Furthermore, in order to decrease the influence of some negative properties of conventional chaotic maps, a modified chaotic generator (MCS) is proposed. Simulation results over the IEEE 802.15.4a channel model show comparable bit error rate performance to other TR methods.     

基于组合双向拍卖的云资源调度方法

针对跨数据中心的资源调度问题，提出了一种基于组合双向拍卖（PCDA）的资源调度方案。首先，将云资源拍卖分为三个部分：云用户代理报价、云资源提供商要价、拍卖代理组织拍卖；其次，在定义用户的优先级及任务紧迫度的基础上，在拍卖过程中估算每一个工作发生的服务等级协议（SLA）违规并以此计算云提供商的收益，同时每轮竞拍允许成交多项交易；最终达到根据用户等级合理分配云资源调度的效果。仿真实验结果表明该算法保证了竞拍成功率，与传统一次拍卖成交一项的组合双向拍卖方案相比，PCDA在竞拍时间段产生的能耗降低了35.00%，拍卖云提供商的利润提高了约38.84%。